skip to Main Content
Undermount Sink Reinstallation

Reinstall or Repair Your Undermount Sink in Frisco, TX

Undermount sinks are sleek, sophisticated, and seamless. With a wide variety of customization options, they allow homeowners to craft the look and feel of the kitchen for a timeless and effortless appearance. The only problem is, if they weren’t installed properly, they can start to sag over time—or worse, fall out entirely. And because the countertop will usually have been cut and polished for that specific sink, sometimes your only option is then to reinstall.

Thankfully, the team at Earl’s Plumbing has extensive experience reattaching fallen undermount sinks and securing them for the long haul. Every truck carries the specific types of specialty tools, sealants, and fittings required to get the job done right. We’ll make sure your unique sink is well-supported, connected properly, leak-free, and ready to operate before we leave!

Schedule Your Plumbing Service Today!

If you’re in Frisco, McKinney, Plano, or any of the surrounding communities, give us a call today.

(972) 845-1700

Our Undermount Sink Services

At Earl’s Plumbing, we have the craftsmanship and plumbing expertise to reinstall undermount kitchen sinks that have dropped or fallen out of place. While we don’t install undermount sinks when they’re brand new, we’re ready and prepared to help put them back in place or repair them when something goes wrong. We can work on stainless steel kitchen sinks, single-bowl sinks, and double-bowl sinks.

The majority of undermount sinks we service are in kitchens, but we’re happy to work on bathroom sinks and bathroom faucets as well. We carry only the highest quality parts to ensure that you won’t have to call us again in the future for another fallen or sagging sink!

logo, company name

Request a Plumbing Estimate Today

"*" indicates required fields

Name
Address*
MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.

Answers to Your Frequently Asked Questions

Undermount sink reinstallation can be a very tricky job. We’re here to answer your questions to put your mind at ease.

When you call Earl’s Plumbing, we’ll make sure to use the strongest, high-quality bonding agent we can to set the sink and keep it from falling out again in the future. Depending on the nature and location of your sink, we can also install additional supports such as sink clip studs or bar clamps if needed. Craftsmanship is key!
Undermount sink pros:

  • Easy to clean (no crevices for crumbs or dirt to accumulate)
  • Streamlined look and feel
  • Easily wipe messes straight into the sink from the edge of the countertop
  • Can be customized with additional features like drainboards

Undermount sink cons:

  • Doesn’t work with all countertop materials (best for marble, granite, or concrete)
  • Can take up a lot of storage space underneath your countertop
  • Require more support than traditional drop-in sinks
  • Are difficult to replace, due to their custom nature
That’s why it’s so important to have a professional plumber complete this job.

  • Appliances & Accessories: Various appliances and accessory devices often have to be removed and then reinstalled, adding cost and complexity to a kitchen sink reinstallation. These include the obvious appliance devices like the garbage disposal, but also items such as reverse osmosis spouts, instant hot water dispensers, soap dispensers, dishwasher air gaps, etc. Occasionally the kitchen faucet may also need to be removed and reinstalled. Since undermount sink work involves complete removal and installation of all components, this process is a perfect time to consider upgrading to a better, more powerful, and quieter garbage disposal. Earl’s Plumbing has multiple garbage disposal options for you to consider, or you can provide your own and we will install it for you.
  • Water Supply Lines: You have two water supply lines (tubes)—one for hot water and one for cold. These are usually silver wire mesh but can be made of different materials. They deliver water to your faucet.
  • Shut-off Valves: All sources of water for faucets (and toilets) should have a functioning shutoff valve at the wall. Because they have a limited lifespan of about 10 years for builder-grade versions, you should be prepared to replace these valves when making major sink repairs or replacements.
  • Drain Assembly: The part that allows you to plug the sink (usually featuring a drain strainer) and the P-Trap (the pipe that looks like a “U”). This may be the most important part of your kitchen sink drain plumbing, as it creates a water seal, preventing smelly, noxious sewer gas from entering the home and acting as a line cleaner. Finally, the assembly ends with a tubular drain pipe called a trap arm. This piece extends from the P-Trap and securely connects to the pipe going into the wall, where it connects to the rest of the drainage system.
  • Watertight Components: Threaded slip nuts and slip nut washers make everything watertight, and if they’re not properly installed, end up causing the majority of leaks under sinks. Far too often, people install silicone, caulk, pipe dope, plumbers putty, leak tape, or all sorts of other quick fixes around these areas. Not only are these materials unnecessary when sinks are installed correctly, but using them is also not good plumbing practice.

See What Frisco is Saying About Our Plumbing Services

“I am very happy with the service I receive from Earl’s Plumbing, this is the second time I called them out for my plumbing issues. Both times they have been able to schedule me right away. They have a good communication system so I know when they will be here. Their techs are always professional and very polite. I will be sure to call them again.”

Mary Nichols

“Earl’s Plumbing did a thorough repair of a tankless water heater we had installed earlier in the year. We did not know this, but if you’re going to go tankless, you need a highly qualified technician to make things right and to be fully covered by warranty. Look no further than Earl’s Plumbing.”

Alex Ward

“Earl’s plumbing is great! Danny came and took care of my problem efficiently and educated me on why it happened and how better to take care of it moving forward. The prices are very affordable and their quick service time is wonderful! Highly recommend them!”

Ravi Patel
a truck is parked on the side of a road
a truck is parked on the side of a road

Earl’s Has the Experts for Undermount Sinks

If your sink has fallen, we understand that you don’t have time or money to waste on slapdash repairs or cut corners. It takes true attention to detail and dedication to workmanship to properly reinstall an undermount sink. Thankfully, the team at Earl’s Plumbing has those qualities and more. If you have questions about our sink reinstallation services, don’t hesitate to contact us today!

logo, company name

Request a Plumbing Estimate Today

"*" indicates required fields

Name
Address*
MM slash DD slash YYYY
This field is for validation purposes and should be left unchanged.

Get In Touch
Address
Plumbing License

M-37127

A Houston Web Design Company
A Houston Web Design Company

©2023 Earl's Plumbing - All rights reserved. Privacy Policy.

©2023 Earl's Plumbing - All rights reserved. Privacy Policy.

Back To Top